The Smart set
This set has 15 anodized aluminium tubes, 8 little Imagineers, and almost 50 clips and plugs that can be linked to each other and the tubes.
The wooden box itself can be used as a soccle or integrated in the object as Imagineers and clips can be clicked on on it !
The Master set
(available as from June 2022)
This set is more for expirenced persons who like to create very complex constructions.
It has 15 small and 15 long anodized aluminium tubes, 16 little Imagineers and almost 100 interlinkable plugs and clips that can be combined in many ways
The Imagineer connectors allow you to quickly build any spacious structure with the aluminium tubes.
The arms and legs can be clamped anywhere on a tube, can hold a tube-end at 3 different places and can be clicked at the woorden box
The arms and legs are connected via a ball-socket pivot, so they are able to rotate and be positioned in any direction.
With the help of the Imagineers you can quickly start exploring possible constructions; it is their task to help you in the construction process and in realizing an idea without obstacles.
Pin-clip, Socket-clip & Flex-clip
All these clips can be clicked onto a tube.
The Pin-clip and the Flex-clip can be coupled to the Socket-clip or to an End-plug and form a pivot connection for 2 tubes.
If multiple clips are combined together, they can also function as a (static) spacer between 2 or more tubes.
This connection can be used to build hanging rotating mobiles, multi-bar linkages or any other non-static, rotatable, swiveling or movable kinetic object.
Just built an object with multiple pivoting connectors and tubes and try to understand what is happening when one tube is rotated.
The Flex-plug has a pin-receiving part and a pin that is flexible connected.
The Flex-plug can be coupled together in a flexible way and with variable corners. The Flex-plugs can be coupled together in a circle; for example 3 Flex-plugs coupled together form a star-shaped tube connector that can connect 3 tubes in a central point called a “node”.
This allows you to create spacious ‘truss’ type of structures like geometrical objects.
However, building with Flex-plugs is difficult as only when the last tube is connected, a static and stable object is created.
You will realize that triangles, pyramids and geometric shapes are the most stable forms.
Before building with Flex-plugs, imagine the final spacious object first. Then couple the Flex-plugs needed to make the node connector for the tubes, slide the tube ends over the coupled Flex-plugs to lock the coupling parts together and only when the final tube connection is made, you created a stable object.
The Fix-plug has both a pin and a pin-receiving part that are fixed under 90 degrees; this allows the fix-plug to be coupled to an End-plug or another Fix-plug and create line objects with 90 degree corners.
Two or more connectors can be coupled together via their pin and pin-receiving coupling parts; after they are coupled, insert the plug into a tube which will lock the coupling parts together.
It is also possible to couple 3 Fix-plugs together so that they are all placed under 90 degrees with regard to each other (in one or two planes), for example to create a tripod object or the corner of a cube.
The rack-plug is a plug which has a coupling pin.
The pin is connected via a bendable part to a plug with two displacable teethed racks.
This plug makes it possible to adjust and fix a (sharp) corner between two tubes.
First couple an End-plug to the Rack-plug, than adjust the corner between them by shifting the racks with regard to each other, squeeze the racks together and push them into a tube end.
Once inserted, the racks are locked together and freeze the corner between the Rack-plug and the End-plug.